–
Honeywell 7800 SERIES Burner Control Unit
The 7800 series are microprocessor-based industrial burner controls for automatically fired gas, oil or combination fuel single burner applications. The 7800-series are enabled for remote monitoring via the Thermal IQ Honeywell Connected Plant solution. For all type of burners with unlimited capacity.
- Approvals:
- CE approved according EN 298 for continuous operation (when used with correct flame amplifier and flame sensor). EU models only
- SIL-3 Capable certified. All models, except EC/RM7823 flame switches
- APAVE accepted. EU models only
- CSA/UL approved. US models only
- Protection Class:
- Europe: IP00 (cabinet mount only)
- Americas: NEMA 1 (cabinet or wall mount)
- Ambient temperature -40 to 60°C
- Maximum humidity 85 %rh
- Failure Response Times (FFRT)
- European 7800-series burner controllers (EU): 1.0 or 2.0s (depends on flame amplifier model)
- American 7800-series burner controllers (US): 0.8 or 3.0s (depends on flame amplifier model).
- Flame detector Depends on plug-in amplifier
- Modular design with plug-in modules.
- Selectable pre-purge time by ST7800A1xxx/U module selection
- Accepts all existing Honeywell optical flame detectors and flame rods
- All information regarding the burner control (6 last lockout conditions, flame signal, hours of operation …) are available on the keyboard display module or through communication